MSA V-EDGE™ Mini Personal Fall Limiter
Engineered for use in overhead and foot-level tie off points, and where leading edge hazards are a concern. The device has been successfully tested for horizontal use over a steel edge without burrs using the methods in VG11 CNB/P/11.060 (edge type A - 0.5 mm). The V-EDGE Mini PFL is also specifically tested and suitable for use on Mobile Elevating Working platforms (DIN 19427:2017-04, a peak force at the anchor point below 3kN).
V-EDGE™ SRL
MSA’s V-EDGE SRL is designed to be used for horizontal, overhead, and leading edge applications, taking the guesswork out of equipment selection. Retraction-dampening feature controls rate of lifeline speed, preventing unwanted damage to the unit, and maximising product longevity.
Latchways® Horizontal Lifeline Systems
The MSA range of Latchways® Horizontal Lifeline Systems provide a permanent fall protection for maintenance works in all industrial environments. The setup of Latchways® Horizontal Lifeline Systems is fit for purpose and tested not only according but also beyond various global standards and legislations. Multiple components offer a wide range of corners, intermediate wire guides and brackets to overcome critical situations on-site. A number of different energy absorbers allows to reduce load into the user and structure in the event of a fall. The patented starwheel technology Transfasteners® allow the system users to walk freely along the entire lifeline system.
Latchways® Horizontal Lifeline Systems for HV Power Transformers
The MSA range of Latchways® Horizontal Lifeline Systems for HV Power Transformers provide a permanent fall protection during routine maintenance or emergency works performed at the top of the transformer. A built-in energy absorber allows to reduce the load into the structure with a minimum cable deflection in the event of a fall. The patented starwheel technology Transfastener® allows the system users to walk freely along the entire lifeline system.
Latchways® Inclined Lifeline Systems
The MSA range of Latchways Inclined Lifeline Systems provide permanent fall protection for maintenance works on structures that slope. These lifelines are assessed by Notified Bodies to be fit for purpose in inclinations between 10° and 90°. Workers climbing on environments such as suspension bridges, conveyors, telecom antennas on roofs or other inclined structures can be secured and walk freely along the entire lifeline system. The guided type fall arresters lock-on immediately if the system user would either fall or slip.
Latchways® Ladder Lifeline Systems
MSA's range of Latchways® Ladder Lifeline Systems provide outstanding personal safety for individuals accessing areas requiring the use of a fixed ladder in a wide range of applications. This range of lifelines has the inherent flexibility to be configured for any ladder, regardless of type, shape or size.
Latchways® Ladder Lifeline Systems for Wind Turbines
MSA's range of Latchways® Ladder Lifeline Systems for Wind Turbines provide outstanding personal safety for individuals accessing the nacelle by the means of climbing a fixed ladder.
Latchways® Overhead Lifeline Systems
Missing structural elements are often critical in environments such as warehouses, loading bays, factories, maintenance bays or airplane hangars. MSA's Latchways® Overhead Lifeline Systems help to overcome this challenge by allowing free span-distances up to 60 m (197 ft) and accessibility for up to 10 users depending on the case.
Latchways® Roof Light Covers
Falls through fragile surfaces are one of the biggest causes of accident when it comes to working at height. Rooflights when flush or inplane can be difficult to differentiate from the roof surface. The MSA Latcwhays Roof Light Covers are a simple solution to provide protection to workers when there is presence of fragile surfaces. This Skylight protection is simply installed over the fall hazard creating a certified protective surface incase of an individual or an object falling.
Latchways® Sealed Self-Retracting Lanyards for Offshore Wind Turbine Foundations
The Latchways® Sealed Self-Retracting Lanyards (SRL) for Offshore Wind Turbine Foundations offer reliable fall protection to workers transferring to and climbing offshore wind turbine foundation ladders. Designed to work in the harshest conditions, the Sealed SRL has undergone extensive, independently verified testing to ensure consistent, reliable long-term performance.
V-SHOCK™ Mini Personal Fall Limiter
The V-SHOCK Mini Retractable Lifeline is designed to take a beating in the roughest environments and maintains consistent performance under extreme use from one project to the next. It is one of the most compact & lightweight Mini SRLs in its class helping to decrease worker fatigue throughout the workday.
V-SHOCK™ Personal Fall Limiter 3m
The V-SHOCK Retractable Lanyard is designed to take a beating in the roughest environments and maintains consistent performance under extreme use from one project to the next.